Salto EventStream
L'interfaccia Salto EventStream crittografa ogni evento in un dispositivo. Questo viene quindi reso disponibile come punto dati. I dispositivi possono essere creati anche manualmente.
Configurazione lato Salto
Antcas Control supporta solo la seguente configurazione degli eventi:
- TCP/IP
- Formato JSON
- Definire una DoorExtID è obbligatorio
- EventDateTimeUTC è obbligatorio per riconoscere un telegramma come valido
- La codifica dei caratteri deve essere impostata su UTF-8
La porta in uscita può essere scelta in base ai criteri delle porte valide. La porta predefinita è 3200. Un'interfaccia è in grado di gestire più client.
ID univoci
Per la comunicazione vengono utilizzate ID univoche. Queste vengono fornite da Salto come DoorExtID. Se questo non è stato definito, i dati ricevuti non verranno inoltrati alla PLC.
Tutte le nuove ID generano automaticamente una porta nell'installazione.
Valutazione
Per creare un trigger, può essere creato presso l'oggetto event_id. Poiché l'oggetto viene modificato ad ogni ricezione, la valutazione può essere implementata utilizzando il blocco funzionale TRIG. Se EventID non è stato definito, verrà generato automaticamente.
Info: L'interfaccia si sincronizza automaticamente con il ciclo più lento della PLC associata. I telegrammi vengono memorizzati nel buffer dal sistema, quindi nessun telegramma va perso.
| Variabile | Punto dati JSON | Tipo di dato |
|---|---|---|
| EventID | stringa | |
| OperationID | intero | |
| OperationDescription | stringa | |
| UserCardID | stringa | |
| UserCardSerialNumber | stringa | |
| IsExit | booleano | |
| UserType | intero | |
| UserName | stringa | |
| UserGPF1 | stringa | |
| UserGPF2 | stringa | |
| UserGPF3 | stringa | |
| UserGPF4 | stringa | |
| UserGPF5 | stringa | |
| DoorName | stringa | |
| DoorGPF1 | stringa | |
| DoorGPF2 | stringa | |
| EventDateTimeUTC | data e ora |
Valori di usertype
| Valore | Descrizione |
|---|---|
| 0 | Carta utente |
| 1 | Porta |
| 2 | Evento software |
Valori di op_id
| Valore | Descrizione (Inglese) |
|---|---|
| 8 | New renovation code for key (online). |
| 16 | Door opened: inside handle. |
| 17 | Door opened: key. |
| 18 | Door opened: key and keyboard. |
| 19 | Door opened: multiple guest key. |
| 20 | Door opened: unique opening. |
| 21 | Door opened: switch. |
| 22 | Door opened: mechanical key. |
| 25 | Door opened: PPD. |
| 26 | Door opened: keyboard. |
| 27 | Door opened: spare card (hotel). |
| 28 | Door opened: online command. |
| 29 | Door most probably opened: key and PIN. |
| 32 | End of office mode (keypad). |
| 33 | Door closed: key. |
| 34 | Door closed: key and keyboard. |
| 35 | Door closed: keyboard. |
| 36 | Door closed: switch. |
| 37 | Key inserted (energy saving device). |
| 38 | Key removed (energy saving device). |
| 39 | Room prepared (energy saving device). |
| 40 | Start of privacy. |
| 41 | End of privacy. |
| 42 | “Duress” alarm. |
| 47 | Communication with the reader lost |
| 48 | Communication with the reader reestablished |
| 49 | Start of office mode. |
| 50 | End of office mode. |
| 51 | Hotel guest cancelled. |
| 54 | Door programmed with spare key. |
| 55 | New hotel guest key. |
| 56 | Start of forced opening (online). |
| 57 | End of forced opening (online). |
| 58 | Start of forced closing (online). |
| 59 | End of forced closing (online). |
| 60 | Alarm: intrusion (online). |
| 61 | Alarm: tamper (online) |
| 62 | Door left opened (DLO). |
| 63 | End of DLO (door left opened). |
| 64 | End of intrusion. |
| 65 | Start of office mode (online). |
| 66 | End of office mode (online). |
| 67 | End of tamper. |
| 68 | Automatic change. |
| 69 | Key updated in "out of site" mode (online). |
| 70 | Expiration automatically extended (offline). |
| 72 | Online peripheral updated. |
| 76 | Key updated (online). |
| 78 | Key deleted (online). |
| 79 | Door has lost communication with the Salto software. |
| 80 | Door has re-established communication with the Salto software. |
| 81 | Opening not allowed: key no activated. |
| 82 | Opening not allowed: key expired. |
| 83 | Opening not allowed: key out of date. |
| 84 | Opening not allowed: key not allowed in this door. |
| 85 | Opening not allowed: out of time. |
| 87 | Opening not allowed: key does not override privacy. |
| 88 | Opening not allowed: old hotel guest key. |
| 89 | Opening not allowed: hotel guest key cancelled. |
| 90 | Opening not allowed: antipassback. |
| 92 | Opening not allowed: no associated authorization. |
| 93 | Opening not allowed: invalid PIN. |
| 95 | Opening not allowed: door in emergency state. |
| 96 | Opening not allowed: key cancelled. |
| 97 | Opening not allowed: unique opening key already used. |
| 98 | Opening not allowed: key with old renovation number. |
| 99 | Warning: key has not been completely updated (online). |
| 100 | Opening not allowed: run out of battery. |
| 101 | Opening not allowed: unable to audit on the key. |
| 102 | Opening not allowed: locker occupancy timeout. |
| 103 | Opening not allowed: denied by host. |
| 104 | Blacklisted key deleted. |
| 107 | Opening not allowed: key with data manipulated. |
| 111 | Closing not allowed: door in emergency state. |
| 112 | New renovation code. |
| 113 | PPD connection. |
| 114 | Time modified (daylight saving time). |
| 115 | Low battery level. |
| 116 | Incorrect clock value. |
| 117 | RF Lock date and time updated. |
| 118 | RF Lock updated. |
| 119 | Unable to perform open/close operation due to a hardware failure. |
| 120 | Lock restarted. |
| 1000 | The Salto software has re-established communication with the door. |
| 1001 | The Salto software has lost communication with the door. |
| 2000 | Guest new key |
| 2001 | Guest copy key |