Kaba exos 9300
The 
Kaba exos 9300 interface exchanges data points of the door locking system. All data points are automatically created as peripherals when connecting, if they do not already exist.
Functionality
The interface connects to a data point server from Dormakaba. First, the connection is authenticated. Then all data points are synchronized. All changes are then transmitted to the application.
Configuration
The password of the interface must first be encoded via console on the Kaba Exos server. For this purpose, for example, the following command is used to encode the password 1234:
u9DpServer CreatePassword 1234
Types
There are various types for communication. If an incorrect type is used for communication, it will not be transmitted correctly.
| Type |
Value |
 Digital Input |
BI |
 Digital Output |
BO |
 Card Reader |
RU |
 Port |
PR |
 Terminal |
SS |
 Door |
DR |
 Door Manager |
SD |
 Access Manager |
FS |
Communication Objects
Each peripheral has predefined communication objects. These can have multiple states and should be correctly decoded.
Note: If the data type BOOL is used with an INT value, this may work, but in case of error, the value -1 can be evaluated as TRUE.
| Variable |
Description |
Data Type |
 alarm |
A value greater than 0 indicates that an alarm is present. An alarm can also be sent. |
int |
| alarm_confirmed |
The alarm has been acknowledged or send acknowledgment. |
bool |
| cmd |
Data point command number. By specifying this argument, a command is sent to the data point. |
int |
 door_type |
The type of a door. |
int |
| active |
The state of the peripheral. This is not used for a door. |
bool |
| mode |
Data point mode. |
int |
| state |
State of the peripheral. See below to see the breakdown. |
int |
| state_text |
Description of the state. |
string |
| alarm_priority |
Alarm priority. |
int |
| alarm_text |
Alarm text of the currently reported alarm. |
string |
| alarm_desc |
Description of the alarm. |
string |
| alarm_checklist |
Description of the measure. |
string |
| time |
Time of the event. |
datetime |
The constant 
id configures the address of the data point. This can only occur once.
cmd (Door)
| Value |
Description |
| -1 |
Normal Operation |
| 0 |
Monitoring |
| 1 |
Open for Access |
| 2 |
Lock |
| 3 |
Statically Open |
| 4 |
Turnstile One-Time Unlocked Outside |
| 5 |
Turnstile One-Time Unlocked Inside |
cmd (Port)
| Value |
Description |
| 0 |
Disconnect (for remote connection) |
| 1 |
Connect (for remote connection) |
cmd (Digital Output)
| Value |
Description |
| 0 |
Turn Off |
| 1 |
Turn On |
door_type
| Value |
Description |
| 0 |
Normal Door |
| 1 |
Turnstile |
mode (Access Manager)
| Value |
Description |
| -1 |
Unknown |
| 0 |
Central Decision |
| 1 |
Local Decision |
| 2 |
Connected (only for Wireless Gateway) |
| 3 |
Commissioning (only for Wireless Gateway) |
mode
| Value |
Description |
| -1 |
Unknown |
| 0 |
Access Profile Check |
| 1 |
One-Time Unlocked |
| 2 |
Locked |
| 3 |
Permanently Unlocked |
| 4 |
Turnstile One-Time Unlocked Outside |
| 5 |
Turnstile One-Time Unlocked Inside |
state (Access Manager)
| Value |
Description |
| -1 |
Not Responding |
| 0 |
Central Decision |
| 1 |
Normal Operation |
| 2 |
Download Running |
| 3 |
Starting |
state (Port, Terminal)
| Value |
Description |
| -1 |
Unknown |
| 0 |
Not Connected |
| 1 |
Connected |
| 2 |
Connection is Being Established |
state (Door Manager, Card Reader)
| Value |
Description |
| -1 |
Unknown |
| 0 |
Not Connected |
| 1 |
Connected |
state (Door)
| Value |
Description |
| -1 |
Unknown |
| 0 |
Open |
| 1 |
Closed |
| 2 |
Locked |
state (Digital Input)
| Value |
Description |
| -1 |
Unknown |
| 0 |
On |
| 1 |
Off |
| 2 |
Interruption |
| 3 |
Short Circuit |
state (Digital Output)
| Value |
Description |
| -1 |
Unknown |
| 0 |
On |
| 1 |
Off |