Salto EventStream
الواجهة Salto EventStream تشفر كل حدث في جهاز. ثم يتم تقديم هذا الجهاز كنقطة بيانات. يمكن إنشاء الأجهزة يدويًا أيضًا.
التكوين من جانب Salto
يدعم Antcas فقط التكوين التالي للأحداث:
- TCP/IP
- تنسيق JSON
- تعريف DoorExtID هو إلزامي
- EventDateTimeUTC هو إلزامي لتحديد رسالة صالحة
- يجب تعيين ترميز الأحرف على UTF-8
يمكن اختيار الميناء الصادر وفقًا لمعيار الموانئ الصالحة. الميناء الافتراضي هو 3200. يمكن للواجهة التعامل مع عدة عملاء.
المعرفات الفريدة
يتم استخدام المعرفات الفريدة للتواصل. يتم تقديم هذه المعرفات من جانب Salto على أنها DoorExtID. إذا لم يتم تعريف هذا المعرف، فلن يتم نقل البيانات المستلمة إلى PLC.
جميع المعرفات الجديدة تخلق بابًا تلقائيًا في التثبيت.
التقييم
لإنشاء محفز، يمكن إنشاؤه عند الكائن event_id. نظرًا لأن الكائن يتغير عند كل استقبال، يمكن تنفيذ التقييم باستخدام كتلة الوظيفة TRIG. إذا لم يتم تعريف EventID، فسيتم توليدها تلقائيًا.
معلومات: تتزامن الواجهة تلقائيًا مع دورة PLC المرتبطة الأبطأ. يتم تخزين الرسائل المؤقتة من قبل النظام، مما يضمن عدم فقدان أي رسالة.
| المتغير | نقطة بيانات JSON | نوع البيانات |
|---|---|---|
| EventID | string | |
| OperationID | int | |
| OperationDescription | string | |
| UserCardID | string | |
| UserCardSerialNumber | string | |
| IsExit | bool | |
| UserType | int | |
| UserName | string | |
| UserGPF1 | string | |
| UserGPF2 | string | |
| UserGPF3 | string | |
| UserGPF4 | string | |
| UserGPF5 | string | |
| DoorName | string | |
| DoorGPF1 | string | |
| DoorGPF2 | string | |
| EventDateTimeUTC | datetime |
قيم usertype
| القيمة | الوصف |
|---|---|
| 0 | بطاقة المستخدم |
| 1 | الباب |
| 2 | حدث برمجي |
قيم op_id
| القيمة | الوصف (الإنجليزية) |
|---|---|
| 8 | New renovation code for key (online). |
| 16 | Door opened: inside handle. |
| 17 | Door opened: key. |
| 18 | Door opened: key and keyboard. |
| 19 | Door opened: multiple guest key. |
| 20 | Door opened: unique opening. |
| 21 | Door opened: switch. |
| 22 | Door opened: mechanical key. |
| 25 | Door opened: PPD. |
| 26 | Door opened: keyboard. |
| 27 | Door opened: spare card (hotel). |
| 28 | Door opened: online command. |
| 29 | Door most probably opened: key and PIN. |
| 32 | End of office mode (keypad). |
| 33 | Door closed: key. |
| 34 | Door closed: key and keyboard. |
| 35 | Door closed: keyboard. |
| 36 | Door closed: switch. |
| 37 | Key inserted (energy saving device). |
| 38 | Key removed (energy saving device). |
| 39 | Room prepared (energy saving device). |
| 40 | Start of privacy. |
| 41 | End of privacy. |
| 42 | “Duress” alarm. |
| 47 | Communication with the reader lost |
| 48 | Communication with the reader reestablished |
| 49 | Start of office mode. |
| 50 | End of office mode. |
| 51 | Hotel guest cancelled. |
| 54 | Door programmed with spare key. |
| 55 | New hotel guest key. |
| 56 | Start of forced opening (online). |
| 57 | End of forced opening (online). |
| 58 | Start of forced closing (online). |
| 59 | End of forced closing (online). |
| 60 | Alarm: intrusion (online). |
| 61 | Alarm: tamper (online) |
| 62 | Door left opened (DLO). |
| 63 | End of DLO (door left opened). |
| 64 | End of intrusion. |
| 65 | Start of office mode (online). |
| 66 | End of office mode (online). |
| 67 | End of tamper. |
| 68 | Automatic change. |
| 69 | Key updated in "out of site" mode (online). |
| 70 | Expiration automatically extended (offline). |
| 72 | Online peripheral updated. |
| 76 | Key updated (online). |
| 78 | Key deleted (online). |
| 79 | Door has lost communication with the Salto software. |
| 80 | Door has re-established communication with the Salto software. |
| 81 | Opening not allowed: key no activated. |
| 82 | Opening not allowed: key expired. |
| 83 | Opening not allowed: key out of date. |
| 84 | Opening not allowed: key not allowed in this door. |
| 85 | Opening not allowed: out of time. |
| 87 | Opening not allowed: key does not override privacy. |
| 88 | Opening not allowed: old hotel guest key. |
| 89 | Opening not allowed: hotel guest key cancelled. |
| 90 | Opening not allowed: antipassback. |
| 92 | Opening not allowed: no associated authorization. |
| 93 | Opening not allowed: invalid PIN. |
| 95 | Opening not allowed: door in emergency state. |
| 96 | Opening not allowed: key cancelled. |
| 97 | Opening not allowed: unique opening key already used. |
| 98 | Opening not allowed: key with old renovation number. |
| 99 | Warning: key has not been completely updated (online). |
| 100 | Opening not allowed: run out of battery. |
| 101 | Opening not allowed: unable to audit on the key. |
| 102 | Opening not allowed: locker occupancy timeout. |
| 103 | Opening not allowed: denied by host. |
| 104 | Blacklisted key deleted. |
| 107 | Opening not allowed: key with data manipulated. |
| 111 | Closing not allowed: door in emergency state. |
| 112 | New renovation code. |
| 113 | PPD connection. |
| 114 | Time modified (daylight saving time). |
| 115 | Low battery level. |
| 116 | Incorrect clock value. |
| 117 | RF Lock date and time updated. |
| 118 | RF Lock updated. |
| 119 | Unable to perform open/close operation due to a hardware failure. |
| 120 | Lock restarted. |
| 1000 | The Salto software has re-established communication with the door. |
| 1001 | The Salto software has lost communication with the door. |
| 2000 | Guest new key |
| 2001 | Guest copy key |